Number “0” flashing on the Touch Screen
- Place the holder back inside the IQOS ILUMA i PRIME Pocket Charger. Ensure it is placed correctly and close the Pocket Charger door.
- Make sure your Pocket Charger is charged enough to fully charge the holder.
- Leave the holder to charge until at least one holder status light turns solid white on the Pocket Charger.
Lights on holder not turning ON
- Check whether the Pocket Charger is charged for at least one experience. To identify this, at least one solid white light will turn on.
- Clean the contacts between the holder and the Pocket Charger.
- Place the holder inside the Pocket Charger—ensure it is placed correctly—and leave the holder until at least one of the holder lights on the Pocket Charger turns solid white.
- Remove the holder from the Pocket Charger and press the holder’s button (short press).
Pause mode is unavailable
• The Touch Screen shows whether Pause mode is available or not, as Pause mode is illustrated by 2 short vertical lines at the top of the Touch Screen.
• Pause Mode can be used once in the first or second consecutive use in Performance Mode and can be activated within the first 3 minutes, or 8 puffs of the experience.
Swipe down across the entire Touch Screen to activate the Pause mode.
• If the swiping motion does not cover the entire length of the Touch Screen, pause mode will not be activated.
Resume the experience by swiping UP across the entire Touch Screen and wait for the preheating.
• Pause Mode can last up to 8 minutes. If experience is not resumed, the Holder will automatically switch off.
FlexPuff not working
Your device will automatically analyze the consumed volume of aerosol and might activate FlexPuff.
When Pause is used, FlexPuff cannot be activated.
If FlexPuff is activated, you will be granted 4 extra puffs that can be used within the remaining time of the 6-minute experience duration.
If you need further assistance, visit our Self-diagnostics tool.