How to use IQOS

The IQOS Manual: How to use IQOS

The Kit

The IQOS kit is easy to use. So, what’s in the box?

• A holder - the tobacco heating device using a specially controlled heating blade
• A pocket charger - for easy charging on the go
• A cleaner – keeping your IQOS clean helps keep it perform at its best
• IQOS cleaning sticks - your kit comes with 10 sticks for quick and easy deep cleaning
• An AC power supply
• A USB cable for charging

Firstly, you need to make sure your IQOS is fully charged. If you’re using it for the first time, make sure you charge the pocket charger for the full 90 minutes.

How to Use IQOS 3 DUO - Getting Started

Step 1. Turn on: press the button at the top for 4 seconds. Check the status lights on your IQOS Holder to see the battery level. Two lights mean it’s fully charged, and you can use it twice. One light means one use. No lights mean it’s time to recharge the holder.

Step 2. Insert: gently insert a HEETS stick. Don’t twist the stick. If you do, you risk breaking the blade. 

Step 3. Heat: After you’ve inserted the HEETS stick, press and hold the holder button. You’ll feel a vibration and the lights will pulse slowly. That means the holder is getting ready. When you feel two vibrations and both status lights are steadily on, that means you’re good to go.

Step 4. Use: If you feel two vibrations again, that means your IQOS time is nearly up. Slide open the IQOS 3 DUO Holder, remove the HEETS stick, and slide the holder shut. Tap the holder button to see the device’s status. Remember: one light means there’s one use remaining. You can enjoy another IQOS experience or place the holder back in the charger.

Never use cigarettes in your IQOS. Only use the specially designed HEETS.

How to Use IQOS 3 Multi - Getting Started

Step 1. Turn on: turn on your IQOS 3 Multi by pressing the button down for four seconds

Step 2. Insert: Rotate the IQOS 3 Multi lid, then put the HEETS stick in. Press in down gently to the filter line.

Step 3. Heat: Hold the button until it vibrates. The light pulses as it heats up. Once it is ready to use, button will stay white and the holder will vibrate twice. In the last 30 seconds you will feel two more vibrations, letting you know that you have 30 seconds left. When the light fades out it means it is finished. Pull the cap up and take out the used HEETS stick.

Step 4. Use: You can use your IQOS 3 Multi 10 times consecutively before you need to charge it again!

Never use cigarettes in your IQOS. Only use the specially designed HEETS.

How to Use IQOS 2.4 Plus - Getting Started

Step 1. Remove: Take the IQOS from the pocket charger.

Step 2. Insert: Slide the HEETS stick into the holder, with the tobacco side facing downwards.

Step 3. Heat: Press and hold the holder button for two seconds. The LED light will start flashing green. When the LED light is solid green, you can start using the IQOS.

Step 4. Use: You can use it for up to 14 puffs or 6 minutes, whichever comes first. The LED light will turn red to indicate that the heating cycle is ending and you have two puffs or 30 seconds remaining. The light then goes off and the experience has finished.

Step 5. Empty: To remove the HEETS stick, slide the cap on the holder upwards and pull it out.

Never use cigarettes in your IQOS. Only use the specially designed HEETS.
IMPORTANT INFORMATION: IQOS IS NOT RISK-FREE. IT DELIVERS NICOTINE, WHICH IS ADDICTIVE.